CATL lithium iron phosphate battery, stable and safe cell, battery pack, system triple protection IP65,
Outdoor installation, home friendly
Modular design, single handling installation
Plug and play 30 minutes quick installation, covers an area of 0.15 square meters, saving time, labor and space
Global cloud platform & mobile APP access open API to support energy interconnection
| System parameters | Running parameters | ||
| Battery type | LFP (LiFePO4) | Maximum charging/discharging current | 50A/80A |
| System weight | 54KG | Rated DC power | 4096W |
| Dimensions (W × H × D) | 540×490×240mm | Maximum charging/discharging power | 2825W/4096W |
| Protection Class | IP65 | Operating temperature range | -10 to 50℃ Charging -10 to 50℃ discharge |
| Warranty | 5 years product warranty 10 years performance guarantee | Humidity | 0~95% (no condensation) |
| Electrical parameters | BMS | ||
| Power capacity | 5.12kWh | Modules are connected | ≤4 |
| Available capacity | 4.6kWh | Capacity | 100-400Ah |
| Discharge depth (DOD) | 90% | Power loss | <2W |
| Rated voltage | 51.2V | Communication mode | CAN & RS485 |
| DC circuit breaker | 125A | Monitoring parameters | System voltage, current, cell voltage, cell temperature, PCBA temperature detection |
| Operating voltage range | 44.8-56.5V | Certification | |
| Internal resistance | <20mΩ | Safety gauge (cell) | Pack: IEC/EN 62619;UN38.3 Cell: IEC/EN 62619;UN38.3;UL1973 |
| Cycle life | 10000 cycles | ||
| PV string input | Efficiency | ||
| Maximum DC voltage | 580V | Maximum efficiency | 97.6% |
| Rated DC voltage | 400V | European efficiency | 97.0% |
| MPPT voltage range | 80V-560V | Protection | |
| Starting voltage | 130V | DC switch | Bipolar DC switch (125A/ pole) |
| Number of MPP trackers | 2 | Anti-island protection | Yes |
| Number of MPP tracker groups | 1 | Output overcurrent protection | Yes |
| The maximum input current of each MPPT | 15A | DC reverse protection | Yes |
| MPPT maximum short circuit current | 18A | Series fault detection | Yes |
| Grid side AC output | AC/Direct surge protection | DC Type II;AC Type III | |
| Rated AC output power | 5000W | Insulation impedance test | Yes |
| Maximum AC apparent power | 7360VA (grid input) | AC short circuit protection | Yes |
| Maximum AC output power | 5000W | Conventional parameters | |
| Rated AC voltage | 230Vac | Dimensions (width × height × thickness) | 540×590×240mm |
| Ac power grid frequency range | 50 / 60Hz±5Hz | Weight | 32kg |
| Maximum output current | 22A | Operating temperature range | -25℃~+60℃ |
| Maximum input current | 32A | Noise (dB) | <25 |
| Power factor (cosΦ) | 0.8 lead -0.8 lag | Cooling method | Natural heat dissipation |
| Current total harmonic distortion | <3% | Maximum working altitude | 2000m |
| Battery input operating | Humidity | 0~95% (non-condensation) | |
| Battery type | LFP (LiFePO4) | Protection level | IP65 |
| Rated battery voltage | 48V | Circuit topology | Battery isolation |
| Charging voltage range | 40-60V | Communication | RS485/CAN2.0/WIFI/4G |
| Maximum charging current | 100A | Display | LCD/APP |
| Maximum discharge current | 100A | Certification & Standard | IEC/EN 62109-1&2;IEC/EN61000-6-1;IEC/EN61000-6-2; EN61000-6-3; IEC/EN61000-6-4;IEC/EN61000-3-11; EN61000-3-12;IEC60529;IEC 60068;IEC61683; IEC62116;IEC61727;EN50549-1;AS 4777.2;NRS 097; VDE-AR-N-4105;CEI0-21;G98;G99;C10/C11 |
| Battery capacity | 100-400Ah | ||
| Lithium battery charging strategy | Depends on BMS | ||
| Ac output (off-grid) | |||
| Maximum output apparent power | 5000VA | ||
| The output is apparent at peak power | 6900VA 10 seconds | ||
| Maximum output current | 20A | ||
| Rated output voltage | 230V | ||
| Rated output frequency | 50/60Hz | ||
| Output voltage harmonics (@ linear load) | <3% (linear load) | ||